Water-Based Paint Strippers
Designed for speed and safety
Aerospace Technology Now Available for Industry
Waverly Strip™ products open the pores of coatings and penetrate down to the substrate where it destabilizes the bond thus releasing the paint from the surface. This adhesion release causes paint to lift in sheets or large chips;
removal and clean up are greatly simplified and costs are dramatically lowered.
Waverly Strip™ products allow paint stripping and coating removal to be completed more efficiently, with minimal need for protective equipment, ventilation or breathing apparatus.
Where Used
- To remove paint, epoxy, stain or polyurethanes from concrete/terrazzo, VCT floors in warehouses, hangars and manufacturing facilities, schools, hospitals, nursing homes
- To remove paint, alkyds, epoxy, stain or polyurethanes from chemical or water storage tanks
- To remove graffiti from unpainted, porous surfaces such as block walls
- To remove decals and coatings from beverage trucks
- To remove powder coating from rejected parts or from hooks, hangars, jigs and trolleys.
- To remove any type of paint or coating where media-blasting is not allowed (environmental concerns, explosion concerns)
- To remove paint or coatings from wood siding or interior jambs and sills
- Used in conjunction with media blasting as a “one-two” punch
- To remove paint from objects found in patient rooms, or hotels, motels rooms where low odor is a must (e.g. air conditioning units)
Waverly Strip™ 210, 310, and 510
- Water-based, coating-remover alternatives to harmful solvent strippers.
- 100% biodegradable, non-toxic, virtually odorless, non-irritating and cost-effective means of removing old paint systems.
- Can be used where abrasive blasting or high-pressure washing cannot be performed
- Does not contain methylene chloride or any other harmful ingredients.
- Very high flash point (>180F) and non-flammable for greater safety
- Total voc’s < 70 gm/liter using the new California method (none are regulated)
- No hap’s or tap’s (hazardous or toxic air pollutants)
- Not regulated by authorities for worker health and safety (OSHA and WHMIS)
- Non-regulated by DOT, TDG
- Can be applied by brush, roller or airless spray pump.
Water-Based Paint Strippers
Designed for speed and safety
Aerospace Technology Now Available for Industry
Waverly Strip™ products open the pores of coatings and penetrate down to the substrate where it destabilizes the bond thus releasing the paint from the surface. This adhesion release causes paint to lift in sheets or large chips;
removal and clean up are greatly simplified and costs are dramatically lowered.
Waverly Strip™ products allow paint stripping and coating removal to be completed more efficiently, with minimal need for protective equipment, ventilation or breathing apparatus.
Where Used
- To remove paint, epoxy, stain or polyurethanes from concrete/terrazzo, VCT floors in warehouses, hangars and manufacturing facilities, schools, hospitals, nursing homes
- To remove paint, alkyds, epoxy, stain or polyurethanes from chemical or water storage tanks
- To remove graffiti from unpainted, porous surfaces such as block walls
- To remove decals and coatings from beverage trucks
- To remove powder coating from rejected parts or from hooks, hangars, jigs and trolleys.
- To remove any type of paint or coating where media-blasting is not allowed (environmental concerns, explosion concerns)
- To remove paint or coatings from wood siding or interior jambs and sills
- Used in conjunction with media blasting as a “one-two” punch
- To remove paint from objects found in patient rooms, or hotels, motels rooms where low odor is a must (e.g. air conditioning units)
Waverly Strip™ 210, 310, and 510
- Water-based, coating-remover alternatives to harmful solvent strippers.
- 100% biodegradable, non-toxic, virtually odorless, non-irritating and cost-effective means of removing old paint systems.
- Can be used where abrasive blasting or high-pressure washing cannot be performed
- Does not contain methylene chloride or any other harmful ingredients.
- Very high flash point (>180F) and non-flammable for greater safety
- Total voc’s < 70 gm/liter using the new California method (none are regulated)
- No hap’s or tap’s (hazardous or toxic air pollutants)
- Not regulated by authorities for worker health and safety (OSHA and WHMIS)
- Non-regulated by DOT, TDG
- Can be applied by brush, roller or airless spray pump.
